Job Capture - Printronix L1524 Software Manual

Job Capture

Job Capture is an application that captures host datastreams through a
specified host interface. This aids in debugging and diagnosing printer errors
when working with technical specialists.
To access the Job Capture application, select a printer from the printer
database and select Applications Job Capture or click the
Job Capture allows you to capture, modify, analyze, and save information to a
file.
To use Job Capture:
1. Be sure the computer running the remote management software is
2. Select Capture Data From and then select the interface the printer will
3. Select Capture Start to place the remote management software in
4. Select Capture Stop to stop the capture.
The capture window displays the capture information in three formats: Text,
Hex, and Capstone. Select View Display Format to choose the information
format. Select View Display Control Codes to view the control codes
embedded in the file.
Once you capture the file and choose the display options, you can save the
information to your local hard drive. Select File Save As and enter a file
Figure 94. Job Capture Window
(job capture) button.
connected to the printer using the diagnostic port selected in the
PRINTER MGMT or Factory menu. See "Printer Setup" on page 8.
use to receive the file you want to capture.
capture mode. The interface sends the information to the terminal window
until you turn off capture mode.

Job Capture

113