T4000 Series Thermal Printers; Laser Printers (L5535, L5520, L1524); Set Password - Printronix L1524 Software Manual

Chapter 1 Printer Setup

T4000 Series Thermal Printers

1. On the operator panel, press the PAUSE key to take the printer offline.
2. Press UP and DOWN at the same time to unlock the ENTER key.
3. Press UP, DOWN, PREV, and NEXT at the same time to enter the
Factory menu.
4. Press NEXT until PRINTER MGMT displays.
5. Press DOWN until Diagnostic Port displays.
6. Press DOWN again to see the current selection.
7. Press NEXT until Debug Ethernet displays.
8. Press ENTER to select it.
9. Press UP and DOWN at the same time to lock the ENTER key.
10. Press PAUSE to put the printer back online.

Laser Printers (L5535, L5520, L1524)

1. On the operator panel, press the ONLINE key to take the printer offline.
2. Press UP and DOWN at the same time to unlock the ENTER key.
3. Press UP, DOWN, PREV, and NEXT at the same time to enter the
Factory menu.
4. Press NEXT until PRINTER MGMT displays.
5. Press DOWN until Diagnostic Port displays.
6. Press DOWN again to see the current selection.
7. Press NEXT until Debug Ethernet displays.
8. Press ENTER to select it.
9. Press UP and DOWN at the same time to lock the ENTER key.
10. Press ONLINE to put the printer back online.

Set Password

See page 43 to learn how to set passwords.
If the password is unknown you must clear it first.
P7000 Series
Go into the Factory menu, then into the PRINTER MGMT menu. Press
Clear Password displays. Unlock the ENTER key, then press ENTER to clear
the User and Supervisor passwords.
Under the Security tab in Printer Properties, delete any passwords that
already exist. Now you may set new passwords as described on page 43.
10
until