Data Validation - Printronix L1524 Software Manual

Data Validation

NOTE: To collect telemetry data, the printer's Telemetry Path (in the
NOTE: Your screens will contain less data than shown in Figure 90 if
Use the Data Validation application for printers equipped with a bar code
validator. Validation data transmits over an ethernet connection to the remote
management software, which interprets the data and displays statistical
information based on the data received.
NOTE: Data Validation is printer specific, and not all printer models have
To access the Data Validation application, first select a printer from the printer
database that has a bar code validator. Then select Applications Data
Validation or click the
Figure 90 shows an example of the Data Validation screen after a print job
runs. The printer sends the bar code report to the remote management
software.
Figure 90. Data Validation Window
VALIDATOR menu) must be set to Network Port. See "Set Telemetry
Path (SL5000/T5000 Series Only)" on page 11.
Telemetry Data (in the VALIDATOR menu) is not set to Full Report or
Validation Mode. Your screens will contain less data than shown in
Figure 91 if Telemetry Data is not set to Full Report. Refer to the
Online Data Validator User's Manual.
Data Validation support.
Data Validation button.

Data Validation

109