Installation 3; Attaching The Bypass Selector - Panasonic MicroClear TK-CS200 Operating Instructions Manual

Installation 3

Keep all parts that are not used during installation, as they may be needed later if the unit is moved or
the faucet is changed.
Outside-screwed faucet
y Water faucet which can attach the bypass
selector without an accessory.
Do not remove the gasket and the filter inside the bypass selector.
If these are moved, return to the original position.
Make sure foreign matter is not attached to the filter and the gasket
is not inclined.
2
Attach the nut
and adaptor.
3
Attach the bypass selector and
tighten the nut until the bypass
selector does not turn.
Do not use any tools.
z
(This may damage the nut.)
Make sure the bypass selector is not
z
inclined.
1
TK-CS200_01_EN.indd TK-CS200_01_EN.indd 6 6

Attaching the bypass selector

Aerator (not used)
y Do not use the
removed aerator.
1
Remove the nut and adaptor.
Gasket and Filter
1
2
2
Inside-screwed faucet
y Water faucet which can attach the bypass
selector with accessory.
Aerator (not used)
y Do not use the removed aerator.
2
Screw in the
bushing.
Insert into the
adaptor.
3
Attach the nut and
adaptor.
The adaptor should be
z
screwed on straight.
Screwing it on tilted may
strip the threads, resulting
in water leaks.
4
Attach the bypass selector and
tighten the
nut until the
bypass selector
does not turn.
Do not use any
z
tools. (This may
damage the nut.)
Make sure the bypass selector is not
z
inclined.
Nut
Adaptor
(with gasket)
Gasket
Bypass
selector
Gasket
1
2
EN7
2022/12/15 2022/12/15 18:41:40 18:41:40