Steps To Take Before Installing The Product - Panasonic TK6305P Instruction Manual

Steps to take before installing the product

● Keep the parts you will not be using in a safe place just in case you relocate or the faucet
needs to be replaced, for example.
● After installing the product, first carry out the checks and inspections, and then start
using the product. (See page 20)
CAUTION
● Keep the accessories out of the reach of babies and small children.
If the above precaution is not observed, the accessories may be accidentally swallowed or other
accidents may occur.
Supplied accessories
Installation Adaptor
Faucets onto which the product can be installed
● Faucets with a thread on the outside
(See pages 8 and 9)
Thread diameter:
6 mm or
more
● Faucets without an aerator (See pages 12 and 13)
<Flared faucets>
more than 10 mm
Flared:
13 mm or more, less than 24 mm
6
(check that they are all present and accounted for)
(with 4 screws)
22 mm
Outside
thread
● Faucets with a thread on the inside
(See pages 10 and 11)
Thread diameter:
Inside
6 mm or
thread
more
<Straight faucets>
more than 10 mm
Diameter of faucet end:
13 mm or more, less than 24 mm
Bushing
(with gasket)
24 mm