Maintenance - Panasonic MicroClear TK-CS200 Operating Instructions Manual

How to Use
2
Open the faucet.
At the beginning of daily use, run water about 1.5 liters (about 15 seconds) before using.
z
(P. EN4)
3
After use, close the faucet.
Water may come out slightly from the main spout even after the water flow is stopped.
z
It is not a malfunction. (This is water remaining in the outlet pipe.)

Maintenance

Important
Do not use detergents, cleansers, paint thinners, benzine, alcohol or kerosene for cleaning purposes.
z
If, for Instance, a detergent has been used by mistake, wipe the surface with a damp cloth to remove
all traces of the detergent.
Otherwise,
• The detergent may get mixed in with the water running through the Water Purifier.
• The plastic parts may become damaged, discolored or deformed.
y Use of cleansers may also impair the workings of the outlet pipe and cause trouble.
Do not use brushes or other implements made of metal (since they may leave scratch marks).
z
Do not use a tool to tighten up the nut (since the nut may be damaged).
z
Main unit, bypass selector and outlet pipe
Soak a soft cloth in water, wring it
out well, and use it to wipe the units
and parts.
clean toothbrush
EN12
TK-CS200_01_EN.indd TK-CS200_01_EN.indd 11 11
(continued)
Purified water
Remove the
dirt using a
or other similar
tool.
Tap water
Remove
the dirt using
a clean cotton
swab, etc.
Main spout
Bypass selector
2022/12/15 2022/12/15 18:41:43 18:41:43