Maintenance
Bypass selector mounting part
Remove the bypass selector, then
rinse the filter and water intake.
The water flow may decrease when
z
the filter in the bypass selector
connection area becomes clogged
with impurities.
How to remove
①
Set the bypass selector to "
②
Loosen the nut, remove the bypass
selector, and take out the gasket and
filter.
Nut
TK-CS200_01_EN.indd
TK-CS200_01_EN.indd
12
12
(continued)
Filter
How to attach
".
Be sure to follow this order.
①
②
③
Gasket
Filter
Water intake
Reinstall
Ensure to
install
Securely tighten the nut.
After mounting the bypass selector,
set the lever to "
" and allow water to
flow for about 5 seconds.
Tighten
firmly by
②
③
●
Using a
toothbrush or
similar tools
hand
EN13
2022/12/15
2022/12/15
18:41:43
18:41:43