System Software; User Software; Checking The Service Mode Of Connection Engine - Canon imagePRESS P400 Service Manual

• GS Mark by TUV
• CCC
• BSMI
• EAC
■ EMI/EMC approvals
• FCC Title 47, Part 15 Subpart B, Class B
• ICES-003 Class B
• VCCI-CISPR32: 2016 Class B
• EN 55032: 2015 + A11:2020 Class B
• EN 61000-3-2: 2019
• EN 55035: 2017 + A11:2020
• EN62311: 2008
• AS/NZS CISPR 32: 2013
• BS EN 55032:2015 + A11:2020
• BS EN IEC 61000-3-2: 2019
• BS EN 61000-3-3: 2013 +A1:2019
• BS EN 55035: 2017 + A11:2020
• BS EN IEC 62368-1:2014 + A11:2017
• BS EN 62311: 2008
• CCC
• BSMI
• EAC

System Software

System Software Fiery System

User Software

PS PrinterDriver
[Win/Mac] PPD File
[Win] Job Properties
[Mac X] Job Properties
[Win/Mac] Impose/Compose
[Win/Mac] Command WorkStation
[Win/Mac] Fiery Remote Scan
[Win/Mac] Hot Folder
[Win] EFI Printer Delete Utility
[Mac] Fiery Software Uninstaller

Checking the Service Mode of Connection Engine

When connecting imagePRESS Server, it is necessary to select the engine service mode COPIER > OPTION > INT-FACE >
IMG-CONT to "3".
When the controller is connected, the automatically recognized value is displayed in the following service mode.
COPIER > OPTION > INT-FACE > CNT-TYPE > xxx
CNT-TYPE
474
Item
Item
imagePRESS Server P400 V1.0
1.02
7.01.002.0
2022/9/27
3.8.0.28
3.4.2.003
6.3.0.18
6.8.0.32
6.7.1.04
4.3.1.03
Non
Non
Model
8
1. Introduction
Ver.
Ver.