Configure Poe Settings - TRENDnet TPE-TG50ES User Manual

TRENDnet User's Guide

Configure PoE settings

PoE > Power over Ethernet
1. Log into your switch management page (see
on page 6).
2. Click on PoE and click on Power over Ethernet.
A PoE System Power Status page displays PoE statistical information such as total PoE
budget, PoE power used, and remaining PoE budget.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management page"
Configure PoE settings
PoE > PoE Configuration
1. Log into your switch management page (see
on page 6).
2. Click on PoE and click on PoE Configuration.
3. Review the settings for each port. Next to each port entry, click Apply to save the
settings.

Port - Indicates the port with a specific PoE status and that you are configuring.
Note: You can Enable the row labeled ALL to apply settings to all ports.

Admin - To activate or deactivate PoE on a specific port, select Enable or
Disable. By default the PoE feature is enabled on all switch ports.

Status - The PoE port status is given as follows:
o
Power ON - The port is supplying PoE power.
o
Power OFF - The port is not supplying PoE power.

Classification - The PoE class is indicated the class of the PD. N/A is displayed
when the port is not supplying power.

Priority - Indicates the port priority: Low, High, or Critical.

PowerLimit – Indicates the power limit by class or power limit defined by the
user.

UserDef – After UserDef is selected in the PowerLimit cell, users can define the
maximum power consumption for a specific port.
Note: The User Defined power limit ranges between 1.0 and 30.0 watts.

Legacy Support – When Legacy Support is enabled, the port sends out Passive
PoE requirements to the device connected to the port.
Note: Doing so, may damage the device connected to the devices' ports.

Power(W) - Indicates the Power in watts that the port is supplying power to
the PD.

Voltage (V) - Indicates the Voltage in volts as measured at the port when the
port is supplying power to the PD.
TPE-TG50ES
"Access your switch management page"
36