TRENDnet TPE-S88 Frequently Asked Questions Manual

TPE-S88 F.A.Q.
Q: What is the default IP address of the TPE-S88?
A:
The default IP address is http://192.168.0.1
Q: What is the default password?
A:
The default password is admin.
Q: How do I configure the switch through the web-based configuration?
A:
Log into the switch by entering the default IP address into the browser. The default IP address is
http://192.168.0.1 and the password is admin.
Q: How do I reset my switch to factory defaults?
A:
Locate the reset button on the back of the switch. Press and hold it in for approximately 15
seconds.
Q: Why doesn't my Cisco 7940G/7960G IP Phone power on when connected to my
TPE-S88?
A:
The Cisco 7940G and 7960G are pre-802.3af POE devices. They will not be able to get power
from the POE switch.
The following link is provided for reference and may provide further information regarding the
incompatibility between 802.3af compliant devices and Cisco phones.
This article is not provided by Cisco nor endorsed by TRENDnet: http://www.voip-info.org/wiki-
Cisco+POE
Note: This may include other Cisco IP Phones that are not 802.3af compliant. For further
information on your Cisco IP Phone, please contact Cisco.
Q: Why are my ping requests slower when using TRENDnet Web SMART
Switches?
A:
Since Web Smart switches are not as robust in features as fully managed switches they have a
slower CPU. Therefore, depending on what processes the Web Smart switch is currently running,
the ping response time will be varied and longer.