Polycom Conference Composer User Manual page 8

NOTE
Figure 4. Project gen-
erated when connected
to a Vortex.
O - : O
FF LINE PERATING
EF
WITHOUT AN
D
EVICE
Conference Composer User Guide
Figure 3. Select A
UTOSCAN
online devices.
If you have any devices currently using the serial port on your PC, such as a PalmPi-
lot's HotSync, please close those programs to free the COM port before running
A .
UTOSCAN
A will automatically find all EF devices (EF2280, EF1210, EF200) attached
UTOSCAN
to the RS-232 port and then automatically download all the settings into Conference
Composer. Once the settings have been downloaded to the PC, any changes you
make to the device through Conference Composer will be sent automatically to the
device, updating its configuration in real-time.
Once Conference Composer has finished downloading the settings from the con-
nected devices, you will see the Navigation area look like Figure 4. The amount of
time it takes to sync with the Vortex depends on the number of presets that have valid
data. More presets means more data must be sent to the PC.
To operate without any devices connected to the computer you can select N
>D ->EF2280 to create a sample Vortex system to configure. This will automati-
EVICE
cally create a Project. Once you have a Vortex installed, your navigation tab should
O
PERATING
to have Conference Composer automatically find
6 Technical Support: 800.932.2774
C C
ONFERENCE OMPOSER
-
EW