F
R
ROM THE
EMOTE
S
ITE
Conference Composer User Guide
At the remote site, open Conference Composer and from the F
. The dialog box that comes up should look similar to the one below in Fig-
ERENCES
ure 20.
Figure 20. F
-> P
ILE
REFERENCES
Find the Comm Port that your modem is connected to and make sure the box beside it
is checked. Click on the corresponding S
comes up, go to the M
ODEM
Figure 21. Modem tab
If the modems hang up before you connect, increase the T
Choose the default string in the I
the following string:
AT F1 E0 Q0 V0 &K3 &D0
Click on the box beside U
26
M
ODEM
button. In the dialog box that
ETTINGS
tab (see Figure 21 below).
S
NITIALIZATION
TRING
M
to enable it. Then enter in the phone number.
SE
ODEM
Technical Support: 800.932.2774
U
V
SE WITH THE
ORTEX
menu choose P
ILE
REF
time.
IMEOUT
pull down menu. It should be
-
Need help?
Do you have a question about the Conference Composer and is the answer not in the manual?