Polycom Conference Composer User Manual page 26

NOTE
Conference Composer User Guide
nected to other devices through the ASPI Bus or EF Bus.
2. In the P menu, select A
ROJECT
Conference Composer.
3. Open a C window by right-clicking on the Serial Port connected to your
ONSOLE
EchoFree device in the Explorer type menu on the left side of the Conference
Composer window. Choose C
4. In the C window, click on the P
ONSOLE
D F LED is blue, which indicates that your computer is communicat-
EVICE OUND
ing with the EF device. Click on the U
5. In the dialog box that comes up, choose the EFB file for your appropriate device.
These EFB files are found in the directory where Conference Composer is
installed. Follow the instructions that come up in the dialog boxes.
When prompted by Conference Composer to perform a S
U , we recommend choosing T
OUGH PDATE
non-volatile memory both before and after the update. If you choose this option, be
sure to Autoscan before you begin the update. Conference Composer will automati-
cally load your settings (including presets and macros) back to your Vortex after
updating the firmware.
24
T
HE
to synchronize the device settings with
UTOSCAN
from the menu that appears.
ONSOLE
tab. Make sure that the ASPI
ROPERTIES
M
PDATE ICROCODE
TANDARD
. This option will reinitialize the
HOROUGH
Technical Support: 800.932.2774
C W
ONSOLE INDOW
button.
U or T -
PDATE HOR