Polycom Conference Composer User Manual page 12

Conference Composer User Guide
will send the desired string to the modem (or any device connected to the RS-232
port) each time the Vortex is reset (either through power-up or a software reset).
This allows the Vortex to put the modem into an Auto Answer Mode, and set the
baud-rate to 9600 bps. The default string is set to: ATE0F1&B1S0=2.
• N -V M
ON OLATILE EMORY
memory will prevent users from overwriting presets that have been saved and
will also prevent the end user from changing the power up default preset.
• F P L
RONT ANEL OCK AND
users from changing settings of the Vortex from the front panel LCD menu.
Users will be able to see what the settings in the device are, but will not be able to
change the device settings.
• M D
ETER ISPLAY ON THE
which input, output, or reference is displayed on the front panel meter.
• D N .
EVICE AME
• D ID (when working off-line). The Vortex Device ID can be changed from
EVICE
the O page only if the device is off-line. To change the Device ID of an
PTIONS
online Vortex, you should change the Device ID from the front panel LCD menu
and then A again.
UTOSCAN
• S S
CREEN AVER TEXT AND OPTIONS
ate 4 sets of messages that can be displayed on the Front Panel LCD on the Vor-
tex. S T is how long after the last front panel button has been pressed
TART IME
before the messages begin displaying. D
elapses before the next message is shown.
10
L P . Locking the Non-Volatile
OCK AND ASSWORD
P . Locking the Front Panel will prevent
ASSWORD
F P . This parameter allows you to select
RONT ANEL
. The Screen Saver allows the designer to cre-
T
ELAY IME
Technical Support: 800.932.2774
D P
EVICE ARAMETERS
controls how much time