Table of Contents
Advertisement
PNA Series Microwave Network Analyzer System
N5250A
New Design
Figure 3-10
New Design Combiner Assembly and mm-Wave Module: View 1
1
3 (3 places)
Refer to
Figure
3-10. To use the mm-wave modules without the combiner assembly, disconnect
the combiner assembly (item 2) from the mm-wave (waveguide) module (item 1) using this
procedure:
1. Remove the three screws (item 3).
Installation and Service Guide N5250-90001
Disconnecting the Combiner Assembly From the mm-Wave Module
2
System Installation
N5230_013_316
3-19
Advertisement
Table of Contents
