Release Notes - H.323 Application
1. General
These release notes apply to version 2.8 of the SoundStation IP H.323 firmware.
2. Changes and Corrections
2.1 Version 2.8
2.1.1 Added or Changed Features
None
2.1.2 Removed Features
None
2.1.3 Corrections
#4193: VSX 7000 and SSIP interoperability issue. There was an issue where the
SoundStation was not selecting the correct audio payload for a call when slave in a
1
dialog
.
2.2 Version 2.7
2.2.1 Added or Changed Features
Due to #3857, the RadVision defined H.323 transfer functionality (i.e. not H.450
standard based transfer) is now controlled via configuration option and is disabled by
default.
2.2.2 Removed Features
None.
2.2.3 Corrections
#3856: Interoperability issue with Altigen Message Center. There was an issue
where a H.450.7 (message waiting indication) made to the SoundStation was
causing the call to be presented to the user as an incoming call.
SoundStation does not currently supports any H.450 services, such calls are now
silently processed without need for user intervention.
#3857: Transfer soft-key does nothing. See note on section 2.2.1 above.
#4655: Cannot set network parameters.
configuration parameters like IP address and IP mask were not properly handled
when set statically by the user which was resulting on an unusable phone.
1
Complete fix for this problem also requires an updated version of the VSX 7000 endpoint not available yet.
General
Copyright © 2003 Polycom, Inc.
There was an issue where network
Version 2.8
Since
Page 1
Need help?
Do you have a question about the ViewStation H.323 and is the answer not in the manual?
Questions and answers