NEFF B64VT73G0B User Manual And Installation Instructions page 16

Table of Contents

Advertisement

en Steam
6.
Press "Temperature".
7.
Swipe left or right to select the temperature.
8.
Press
to confirm the setting.
9.
Press "Cooking time".
10.
Swipe left or right to select the duration.
11.
Press
to confirm the setting.
12.
Press
to start the dough proving process.
→ "Pausing operation", Page 14
a If the water tank runs dry during the dough proving
process, the operation is paused.
→ "Refilling the water tank", Page 15
a Once the duration has elapsed, an audible signal
sounds and the appliance stops heating.
→ "Switching off the appliance", Page 13
13.
Press any button to end the signal tone.
14.
Empty the water tank and dry the cooking compart-
ment.
→ "After using steam operation", Page 17
9.3 Added steam
When you cook with added steam, the appliance intro-
duces steam into the cooking compartment at various
intervals. This gives your food a crispy crust and a
glossy surface. Meat stays juicy, tender and only under-
goes a minimum reduction in volume.
Types of heating and functions for added steam
You can switch on added steam for the following types
of heating and functions:
¡ "Circo Therm hot air" 
¡ "Top/bottom heat" 
¡ "Circo-roasting" 
¡ "Bread baking setting" 
¡ "Keep warm" 
¡ → "Meat probe", Page 18
¡ → "Dishes", Page 20
Switching on added steam
1.
Fill the water tank.
→ "Filling the water tank", Page 14
2.
Press
to switch the appliance on.
3.
Set a suitable type of heating.
→ "Types of heating and functions for added steam",
Page 16
4.
Set the required temperature.
5.
Press "Added steam".
6.
Press the required steam intensity:
Symbol
Added steam
"Low" (Setting 1)
"Medium" (Setting 2)
"High" (Setting 3)
7.
Press
to confirm the setting.
8.
Press
to start operation with added steam.
a If the water tank runs dry during the added steam
process, "Fill water tank" appears on the display.
The appliance continues to operate without added
steam.
→ "Refilling the water tank", Page 15
9.
When the food is ready, use
ance off.
10.
Empty the water tank and dry the cooking compart-
ment.
→ "After using steam operation", Page 17
16
to switch the appli-
Changing added steam
1.
Press
⁠ .
2.
Press "Added steam".
3.
Press the required steam intensity.
4.
Press
to confirm the setting.
Cancelling added steam
1.
Press
⁠ .
2.
Press "Added steam".
3.
Press
⁠   "Off".
4.
Press
to confirm the setting.
a The operation continues without adding steam.
9.4 Steam jet
You can use "Steam boost" to specifically add intensive
steam at various intervals. This makes bread and bread
rolls in particular wonderfully crispy and gives them a
golden colour.
The appliance adds clouds of steam to the cooking
compartment for approximately 3 to 5 minutes. De-
pending on the operation, you can activate the steam
boost several times.
Types of heating and functions for steam boost
You can switch on steam boost for the following types
of heating and functions:
¡ "Circo Therm hot air" 
¡ "Top/bottom heat" 
¡ "Circo-roasting" 
¡ "Bread baking setting" 
¡ → "Meat probe", Page 18
Switching on steam boost
1.
Fill the water tank.
→ "Filling the water tank", Page 14
2.
Press
to switch the appliance on.
3.
Set a suitable type of heating.
→ "Types of heating and functions for steam boost",
Page 16
4.
Set a temperature above 120 °C.
5.
Press "Steam boost".
6.
Press
to start operation with steam boost.
Once
lights up, the water is heated up sufficiently
to use the steam boost.
Do not use the steam jet until the appliance has
completely heated up.
Note: If rapid heating
can only be triggered once rapid heating is com-
plete.
7.
Press
at the desired time.
a The steam jet is triggered and the appliance adds
clouds of steam to the cooking compartment for ap-
prox. 3 to 5 minutes.
a When the steam boost has finished, the operation
continues to run. Depending on the operation, the
steam jet can be triggered again if necessary.
a If the water tank runs dry during steam boost, "Fill
water tank" appears on the display. The operation
continues without steam boost.
→ "Refilling the water tank", Page 15
8.
When the food is ready, use
ance off.
9.
Empty the water tank and dry the cooking compart-
ment.
→ "After using steam operation", Page 17
is activated, the steam jet
to switch the appli-

Advertisement

Table of Contents
loading

Table of Contents