Table of Contents
Advertisement
en Steam
4.
Press the type of heating.
5.
Press "Temperature".
6.
Swipe left or right to select a temperature.
7.
Press
to confirm the setting.
Also available to select:
– Rapid heating → Page 22
– Cooking time → Page 17
– Ready at → Page 18
– Added steam → Page 16
– → "Meat probe", Page 18
– Information → Page 14
8.
Press
to start the operation.
Note: When you are preheating the appliance, the
optimal time to place your food in the cooking com-
partment is as soon as the heat-up indicator is filled.
a The cooking time appears on the display.
a The heat-up indicator bar visualises the rising tem-
perature.
9.
When the food is ready, use
ance off.
8.5 Changing the temperature
You can also change the temperature once you have
started the operation.
1.
Press "Temperature".
2.
Swipe left or right until the changed temperature ap-
pears.
3.
Press
to confirm the setting.
a The temperature is changed.
8.6 Changing the type of heating
If you switch to a different type of heating, the appli-
ance will reset all the settings.
1.
Press
to pause operation.
2.
Press
to switch to the types of heating.
3.
Swipe left or right until the required type of heating
appears.
4.
Press the type of heating that you want to use.
5.
Adjust the temperature or level, if required.
6.
Press
to start the operation.
8.7 Pausing operation
1.
Press
.
9 Steam
Food can be cooked particularly gently using steam.
You can use the special types of steam heating, or use
steam assistance with certain types of heating.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
▶
Open the appliance door carefully.
▶
Keep children at a safe distance.
14
to switch the appli-
2.
Press
again to resume operation.
8.8 Displaying information
Note: In most cases, you can call up information about
the function that you have just started.
1.
Press "Information".
a The information will be displayed for a few seconds.
2.
Press
to close the information.
8.9 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting.
Note: If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again.
1.
Change the "Lighting" basic setting to "Always off".
→ "Basic settings", Page 23
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
2.
Set the required type of heating.
→ "Setting the type of heating and temperature",
Page 13
3.
Set the required cooking time depending on the
type of heating.
→ "Cooking time", Page 17
4.
Use "Ready at" to set the time at which the opera-
tion should end.
→ "Delayed start/"Ready at" time", Page 18
5.
Place the food in the cooking compartment before
the appliance starts to heat.
6.
Press
to start the operation.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
7.
When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Note: If necessary, change the basic setting for the
lighting again.
9.1 Before using the steam function
Before using the steam function each time, make sure
that your appliance is supplied with sufficient water.
Filling the water tank
WARNING ‒ Risk of fire!
Due to the hot surfaces, vapours from flammable li-
quids may catch fire in the cooking compartment (ex-
plosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
▶
Do not pour flammable liquids (e.g. alcoholic drinks)
into the water tank.
▶
Only fill the water tank with water or with the descal-
ing solution we have recommended.
Advertisement
Table of Contents
