Table of Contents
Advertisement
2.
Make all other settings for initial start-up in the
Home Connect app.
Setting the time
1.
Swipe left or right to select the hours.
2.
Press the minutes.
3.
Swipe left or right to select the minutes.
4.
Press
to confirm the time.
Setting the date
1.
Swipe left or right to select the correct year.
2.
Press the month.
3.
Swipe left or right to select the correct month.
4.
Press the day.
5.
Swipe left or right to select the correct day.
6.
Press
to confirm the date.
Setting the water hardness
1.
Swipe left or right to select the water hardness
range.
→ "Determining the water hardness before switching
on the appliance for the first time", Page 12
2.
Press
to confirm the water hardness range.
3.
Press "OK" to end the initial start-up.
4.
Open and close the appliance door once.
a The appliance will perform a self-test, after which it
will be ready to use.
a The initial start-up is now complete.
7.3 Cleaning the appliance
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
Remove the product information, accessories and
any leftover packaging (e.g. polystyrene pellets)
from the cooking compartment.
8 Basic operation
8.1 Switching on the appliance
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
▶
Press
to switch the appliance on.
Notes
¡ In the basic settings, you can specify whether the
display shows the main menu or another function
when the appliance is switched on.
→ "Basic settings", Page 23
¡ If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
8.2 Switching off the appliance
▶
Press
to switch the appliance off.
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press
to switch the appliance on.
→ "Switching on the appliance", Page 13
4.
Fill the water tank.
→ "Filling the water tank", Page 14
5.
Set the required type of heating, temperature and
steam assistance for the heat-up process and press
to start.
→ "Setting the type of heating and temperature",
Page 13
→ "Added steam", Page 16
Heating up
Type of heating
Temperature
Cooking time
6.
Ventilate the kitchen while the appliance is heating.
7.
Press
to switch off the appliance after 1 hour.
→ "Switching off the appliance", Page 13
8.
Allow the appliance to cool down.
9.
Clean the smooth surfaces with soapy water and a
dish cloth.
10.
Empty the water tank and dry the cooking compart-
ment.
→ "After using steam operation", Page 17
11.
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
Notes
¡ The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→ "Residual heat indicator", Page 13
¡ The cooling fan will continue to run until the cooking
compartment has cooled down.
→ "Cooling fan", Page 8
8.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display
Residual heat high
Residual heat low
8.4 Setting the type of heating and
temperature
1.
Press
to switch the appliance on.
2.
Press "Types of heating".
3.
Swipe left or right until the required type of heating
appears.
Basic operation en
Circo Therm hot air
with steam assistance
, steam intensity High
Maximum
1 hour
Temperature
Over 120 °C
Between 60 and 120 °C
13
Advertisement
Table of Contents
