Yaesu WIRES-X FT3DE Instruction Manual page 68

Status bar:
Status indicator:
User monitoring
window:
Log window:
Chat window：
Function
window：
For other details of each display, refer to "Main Screen" (page 66) of the WIRES-X Connection Kit HRI-200 Instruction Manual.
Displays information such as the WIRES-X software status and descriptions of a menu item
pointed by the cursor.
For details, refer to "Displaying the operating instructions" （page 92）of the WIRES-X
Connection Kit HRI-200 Instruction Manual.
Displays the status of your node station with icons.
・Connection status of the transceiver
The transceiver is connected. (The transceiver model name is displayed.)
The transceiver is connected. (The transceiver model name is unknown.)
The transceiver is not connected, or the connection is incorrect.
・Operating status
operating mode of your node station are shown.
Not transmitting （DIGITAL: Digital node station, GM: GM node station）
Transmitting （DIGITAL: Digital node station, GM: GM node station）
・User ID of the connection destination
Room that are connected will be shown.
Not connecting to another Node station (blank)
Connecting to another Node station (indicated User ID)
・Transmitting status
Click this icon to toggle between transmit prohibit and release alternately.
Not transmitting
Transmitting
Prohibit transmission
・Receiving status The signal receiving status of the node and the repeating status of the
received signal are shown.
Not receiving
Receiving an analog signal, or digital signal whose DG-ID number does not
match (not relaying)
Receiving a digital signal whose DG-ID number matches (not relaying)
It receives reception of a digital signal whose DG-ID number matches and
relays it to other node stations or rooms via the Internet.
・Transmission timeout timer
When sending, it counts down and displays the remaining time (Up to 3 minutes) until
automatic transmission stops.
Displays the information below the status indicators, of the digital Node station (mobile or
fixed) that is accessing your Node station.
On the right side of the main screen, the window in the middle shows the WIRES-X software
operating status.
The chat history is shown in the window. There is a text entry field at the bottom of the window
where you can chat with the owner of the node or room you are connecting to.
There are dedicated buttons for other functions.
Connection status to a node station or room on the Internet and
The user ID information of the Node station /
Shows whether or not your Node station transmits signals.
67