Yaesu WIRES-X FT3DE Instruction Manual page 52

④ Connecting to the node or room you have most recently connected
1. If you have previously connected to a node ID or a room ID on the Internet, it
appears in gray at the bottom of the screen.
• Press the PTT switch or touch the ID to connect to the previous connection
destination. When you connect, the connection destination is displayed in
white.
• If connection is unsuccessful, an error message appears and the name flash-
es again.
⑤ Entering the DTMF ID number (5 digits) of the node or the room
1. Press and hold the [#] key on the microphone.
Displays the DTMF ID input screen.
2. Enter the 5-digit DTMF ID.
3. Press the [#] key on the microphone to start a connection.
• Once connection is successfully established, "Connected" will appear on the LCD.
• If connection is unsuccessful, an error message appears and the screen returns to the DTMF ID input
screen.
• Press the [  ] key on the microphone to cancel the DTMF input screen.
51