Yaesu WIRES-X FT3DE Instruction Manual page 40

While operating the portable node, the following functions may be set and operated on the portable node FTM-300D/
FTM-200D transceiver.
Function
Return to the transceiver setting screen
Adjusts the squelch level
Enters the BACKTRACK screen
Enters the Set mode*
Displays the Function Menu Screen (FTM-300D)
Displays the Function List Screen (FTM-200D)
Selects the Transmission Power Level
Selects Speaker Mute
Turning the back light ON and OFF
Disconnects a node or a room on the Internet
*Some items in the Set mode and Function menu are automatically set for the Portable Digital Node function, so the
settings cannot be used.
⿟ Setting the speaker mute
The audio output to the speaker of the node station FTM-300D/FTM-200D transceiver can be muted, it cannot be set
in Direct Operation.
Press the [MUTE] key on the microphone each time toggles the mute mode as follows.
 MUTE OFF  MUTE ALL MUTE TX  MUTE RX  MUTE OFF ・・・
MUTE OFF: Disable mute.
MUTE ALL: Mute both the received voice from the C4FM digital station and the voice from the node station on the
Internet.
MUTE RX: Mute the received voice from the C4FM digital station.
MUTE TX: Mute the voice from the node station on the Internet.
Key or Dial
Press and hold the D X key
Press the SQL key, then rotate the A-Band DIAL knob (FTM-300D)
or the DIAL knob (FTM-200D)
Press the DISP key
Press and hold the F
SETUP
Press and hold the F
MENU
Press the F key (FTM-300D),
SETUP
Press the F
key (FTM-200D)
MENU
Function Menu  [FUNCTION]  [TXPWR] (FTM-300D),
Function List  [TXPWR] (FTM-200D),
or press the P4 key on the microphone (by default setting)
Press the MUTE key on the microphone
Press and hold the DISP key
Press and hold the * key on the microphone
39
key (FTM-300D),
key (FTM-200D)