Yaesu WIRES-X FT3DE Instruction Manual page 38

While operating the portable node, the following functions may be set and operated on the portable node FTM-400XD/D
transceiver.
Function
Return to the transceiver setting screen
Squelch OFF
Adjusts the squelch level
Enters the BACKTRACK (COMPASS) screen
Displays the Function menu Screen*
Turning the display ON and OFF
Selects the Transmission Power Level
Selects Speaker Mute
Disconnects a node or a room on the Internet
*Some items in the Function menu are automatically set for the Portable Digital Node function, so the settings cannot be used.
⿟ Setting the speaker mute
The audio output to the speaker of the node station FTM-400XD/D transceiver can be muted, it cannot be set in
Direct Operation.
Touch the [MUTE] on the LCD each time toggles the mute mode as follows.
 MUTE OFF  MUTE ALL MUTE TX  MUTE RX  MUTE OFF ・・・
MUTE OFF: Disable mute.
MUTE ALL: Mute both the received voice from the C4FM digital station and the voice from the node station on the
Internet.
MUTE RX: Mute the received voice from the C4FM digital station.
MUTE TX: Mute the voice from the node station on the Internet.
When the MUTE setting is enabled, the [MUTE] in orange on the LCD.
Key or Dial
Press and hold the D X key or press the P3 key on the micro-
phone (By default setting)
Press the P1 key on the microphone (By default setting)
Touch [SQL] on the LCD screen, then rotate the DIAL knob
Press the DISP (SETUP) key
Press the F (MW) key
Press and hold the DISP (SETUP) key
Touch [TX PWR] in the Function Menu Screen or press the P4
key on the microphone (By default setting)
Press the [MUTE] on the LCD screen
Press the * key on the microphone (Press and hold)
37