Yaesu WIRES-X FT3DE Instruction Manual page 15

FTM-500DR/DE,
FTM-400XDR/XDE/DR/DE, FTM-300DR/DE, FTM-200DR/DE or FTM-100DR/DE

When using FTM-500DR/DE, FTM-400XD/D, FTM-300DR/DE, FTM-200DR/DE or FTM-100DR/DE, the cable
connection with the personal computer is the same for both Access Point and Direct Operation.
1. Refer to the below figure and connect the SCU-56 or SCU-20 PC connection cable that is supplied with the separately
sold SCU-58 or SCU-40 WIRES-X connection cable kit, and the audio cable.
The connection is complete.
When communicating via the Internet in "Portable HRI Mode", refer to "Adjusting Audio Level in the Access Point
(Portable HRI Mode)" (page 69) or "Adjusting Audio Level in the Direct Operation (Portable HRI Mode)" (page
71) and adjust the audio level of the computer.
SCU-56 or SCU-20
14