Yaesu WIRES-X FT3DE Instruction Manual page 50

 FTM-400XD/D
There are five ways to connect to a digital room or a digital node on the Internet.
① Searching from the node & room lists (page 49)
② Searching the node ID or the room (page 49)
③ Selecting the node or the rooms registered in the category list (page 50)
④ Connecting to the node or room you have most recently connected (page 51)
⑤ Entering the DTMF ID number (5 digits) of the node or the room (page 51)
Another C4FM digital transceiver accessing the portable node frequency and using the WIRES-X DG-ID number may
also connect a node or a room. For details, refer to the Operating Manual (WIRES-X Edition) of each transceiver.
① Searching from the node & room lists
1. Touch [▼].
Displays the category list.
2. Touch [ALL] twice.
Displays the list of accessible nodes and rooms.
• Connection destinations are displayed from the room list and then node list.
• On the connection destination room columns, the number of activities (the
number of nodes connected to each room) appears on the right side.
3. Touch the node or room you want to connect to establish the connection.
By pressing the PTT switch, you may also establish the connection while talking.
Once connection is successfully established, "Connected" will appear on the LCD.
If connection is unsuccessful, an error message appears and the screen returns
to the list of nodes and rooms.
② Searching by node or room ID
1. Touch [▼].
Displays the category list.
2. Touch [SEARCH & DIRECT].
Displays the character input screen.
49