Connecting The Keyboard; Connecting A Usb Keyboard; Connecting A Ps/2 Keyboard; Connecting External Devices To The Serial Interface - Fujitsu ESPRIMO D70 Series Operating Manual

Connecting the keyboard

You can connect a USB keyboard or a PS/2 keyboard to your device.
Connecting, Keyboard,

Connecting a USB keyboard

Use the supplied keyboard cable only.
Connecting, USBport,
► Plug the flat rectangular USB connector of the keyboard cable into a USB port of the device.
USBport

Connecting a PS/2 keyboard

Use the supplied keyboard cable only.
ConnectingaPS/2keyboard Connecting,
The PS/2 keyboard is only detected by the device if you connect the keyboard
when the device is switched off and then switch the device on again.
► Switch your device off.
► Plug the round plug of the keyboard cable into a keyboard port of the device.
Keyboard,
► Switch your device on again.

Connecting external devices to the serial interface

Devices, Serialinterface, Serialinterface Externaldevices,
For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.
External devices can be connected to the serial port.
► Connect the data cable to the external device.
► Connect the data cable to the corresponding serial interface.

Port settings

Serialinterface,
You can change the settings of the port in the BIOS Setup.

Device drivers

Device drivers,
The devices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
Fujitsu
Connecting external devices
23