Setting Up The Device - Fujitsu ESPRIMO D70 Series Operating Manual

Getting started

Setting up the device

Device, Ergonomic Videoworkstation
When setting up your device, please read the recommendations and
safety notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will mark the surface they stand on.
Depending on your device location, disturbing vibrations and noises may occur. In
order to avoid this, a minimum distance of 10 mm / 0.39 inch to other devices or
objects should be maintained on housing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
For ventilation surfaces, a minimum distance of 200 mm / 7.87 inch
from the device must be maintained.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see
Page 40, "Ambient conditions"). Protect the device against dust, humidity and heat.
Operating position
You can use the device in a vertical or horizontal operating position.
With the aid of suitable feet, it is possible to use the device in a vertical operating position
"Vertical operating position with feet (optional)", Page
(see
14
"Technical specification",
15).
Fujitsu