Access Authorisation Via Smartcard; Operating The Smartcard Reader (Optional); Delete Data - Fujitsu ESPRIMO D70 Series Operating Manual

Operation

Access authorisation via SmartCard

Accesspermission,SmartCard Securityfunctions
In systems equipped with a SmartCard reader, access can be restricted to those
users who have a corresponding SmartCard.

Operating the SmartCard reader (optional)

► Connect the external SmartCard reader to your system as described in
the instructions for the SmartCard reader.
SmartCard reader,
After the device is switched on, you will be prompted to insert your SmartCard.

Delete data

data
Erase Disk function for hard disks and solid state drives
DeleteSATAharddisk EraseDisk
Erase Disk is a solution integrated in the firmware of FUJITSU desktops (UEFI: Unified Extensible
Firmware Interface) to delete all data from a hard disk or Solid State Disc drives (SSDs).
With this function, all data from internal disks or SSDs can be irretrievably deleted before the
hard disks or the whole system are disposed of. The function can also be used if hard disks
are to be completely deleted, e.g. before installing a new operating system.
Further information on Erase Disk can be found on the Internet at
"http://support.ts.fujitsu.com/download".
Delete personal data in volatile and non-volatile memories
All FUJITSU desktops store personal data in volatile and non-volatile memories. The
main components on which this data is stored are:
• hard disks
• SSDs
In addition, there are other internal components (e.g. mainboard) that can contain personal
data even when the system is switched off and disconnected from power.
For more information on deleting this data, see the "Data Deletion" document
on the Internet at "http://support.ts.fujitsu.com/download".
32 Fujitsu