Switching On For The First Time: Installing The Software; Switch On The Monitor And The Machine - Fujitsu ESPRIMO D70 Series Operating Manual

Switching on for the first time:
installing the software
Installing, Software, Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these settings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process must not be interrupted.

Switch on the monitor and the machine

► Switch on the monitor (see operating instructions for the monitor).
Fujitsu
Switching on for the first time: installing the software
► Press the ON/OFF switch (1) on the
front of the device.
The operational display will light up
and the machine will start.
1
27