Table of Contents
Advertisement
1.3 System Features
The following table provides you with an overview of the main features of the
2029P-E1CR48H/L. Please refer to Appendix C for additional specifications.
Motherboard
X11DSC+
Chassis
SC226STS
CPU
The X11DSC+ serverboard supports dual
Intel® Xeon® 81xx/61xx/51xx/41xx/31xx and 82xx/62xx/52xx/42xx/32xx series (Socket P) processors which offer
three Intel
UltraPath Interconnect (UPI) of up to 10.4 GT/s.
®
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers.
Refer to the block diagram on page 16 to determine which slots or devices may be affected.
Socket Type
Socket P
Memory
The integrated memory controller embedded in the processor supports up to 6 TB of 3DS Load Reduced DIMM
(3DS LRDIMM), 3DS Registered DIMM (3DS RDIMM) DDR4 (288-pin) ECC of up to 2933/2666 MHz modules in
24 slots.
Chipset
Intel PCH C621 chipset
Expansion Slots
Supports the following expansion slots:
•
One SIOM module
•
Two PCI-E 3.0 x16 slots
•
One PCI-E 3.0 x8 slot
Hard Drives
Up to 24 2.5" hot-swap hard drives in front of the chassis and up to 24 2.5" drives in pop-up riser drive bays on
the top of the chassis.
Power
Dual 1600 Watt, Titanium Level, redundant power supplies
Cooling
Up to five 8-cm fans
Dimensions
(WxHxD) 17.2 x 3.5 x 30.7-in (437 x 89 x 780-mm)
System Features
9
Chapter 1: Introduction
Advertisement
Table of Contents
