Appendix C System Specifications - Supermicro SuperStorage 2029P-E1CR48H User Manual

Table of Contents

Advertisement

Processors
Supports dual Intel® Xeon® 81xx/61xx/51xx/41xx/31xx and 82xx/62xx/52xx/42xx/32xx series (Socket P) processors which offer
three Intel® UltraPath Interconnect (UPI) of up to 10.4 GT/s.
Note: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel PCH C621 chipset
BIOS
128 Mb AMI® Flash ROM
Memory
Supports up to 6 TB of 3DS Load Reduced DIMM (3DS LRDIMM), 3DS Registered DIMM (3DS RDIMM) DDR4 (288-pin) ECC
of up to 2933/2666 MHz modules in 24 slots.
SATA Controller
On-chip (Intel PCH C621) controller
Drive Bays
48 2.5"" hot-swap drive bays to house SAS3/SATA4/NVMe (up to four) drives
PCI Expansion Slots
Supports the following expansion slots:
• One SIOM module
• Two PCI-E 3.0 x16 slots
• One PCI-E 3.0 x8 slot
Motherboard
X11DSC+
Chassis
SC226STS-R1K62P1; 2U Rackmount, (WxHxD) 17.2 x 3.5 x 30.7-in (437 x 89 x 780-mm)
System Cooling
Up to five 8-cm PWM fans
Power Supply
Model: PWS-1K62A-1R
AC Input Voltages: 100-127/200-240 VAC
Rated Input Current: 13-9A (100-127V)/10-6A (200-240V)
Rated Input Frequency: 50-60 Hz
Rated Output Power: 1600 Watt
Rated Output Voltages: 100-127V: +12V (83.3A), +12Vsb (2.1A); 200-240V: +12V (133A), +12Vsb (2.1A)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
Appendix C
System Specifications
151
Appendix C: System Specifications

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superstorage 2029p-e1cr48l

Table of Contents