User Manual – ALP221e
9.2 Managing input and output levels
Note that after the first installation of the card, the default gain settings are as follows:
Digital input and output gains are set to 0 dB
●
The 8x8 routing matrix is configured this way:
●
- Play 1-2 routed to outputs 1-2
- Play 3-4 routed to outputs 3-4
- Inputs 1-2 (AES3) routed to Rec 3-4
The other routing points of the matrix are muted.
Click on the
icon to access the "I/O Monitor" view which is used to adjust audio levels.
The clock source used at a given moment is displayed in
the "Sync Source" field, and its frequency value is given
by the "Sampling Rate" field.
20