Table of Contents
Advertisement
Accessories
Number differs by package.
No.
Part name
(1) Loop harness
(2) Pass-through harness
(3)
Door loop cover
(4)
Jamb cover
Door loop
(5)
Corrugated tube
(6) I/O harness
(7) Power harness
For OA-607 T
Mounting
-
screws
For door loop cover
or jamb cover
For OA-607 T
Mounting
-
templates
For jamb cover
T-tap connector
(male/female)
-
Hook-and-loop fastener
(1)
(2)
Appearance
For connecting OC-907C T and OA-607 T
(via door loop), length 7'3" (2200 mm).
For connection between door front/back
(inner/outer) OA-607 T, length 8" (210 mm).
Door loop cover through which the loop
harness passes. The loop harness is connected
from there on the side of OA-607 T.
Installed on the jamb side, this cover conceals
the loop harness takeout hole from the jamb side
while the harness is run through.
The loop harness runs through this tube between the
jamb cover and the door loop cover.
2'4 (700mm)
The following two lengths are included.
• 2'4"(700 mm): Intended for standard concealed wiring.
1' (300mm)
• 1'(300 mm): Intended for exposed wiring.
Signal line for connection between door controller and
OC-907C T, length 4'3" (1300 mm).
Power line for connection between door controller
and OC-907C T, length 3' (920 mm).
Silver
Black
Templates for OA-607 T mounting holes, door leaf
front/back through holes, and door loop cover.
Set of door leaf (R) and (L).
Template for jamb cover.
A voltage line branch connector for confirming whether
there is output voltage from the door controller to the
connected motor.
Double-sided tape for mounting OC-907C T.
(3)
(4)
(6)
(7)
Description
(5)
Number per package
ELITE
ELITE
ELITE
PRO
PRO2
PRO LE
2
2
1
1
2
0
2
2
1
2
2
1
2
2
1
2
2
1
1
1
1
4
8
2
8
8
4
2
2
1
2
2
1
4
4
2
1
1
1
3
Advertisement
Table of Contents
