Dipswitch Settings; Detailed Settings - Optex ELITE PRO Instruction Manual

■ Dipswitch settings

For automatic settings, check the "
● OC-907C T
Factory default settings
SW Function
1 Priority setting
2 Wi-Fi
***
3
Knowing act
4
Test output (activation)
5 to 8 Mandatory
● OA-607 T
Dipswitches
Factory default settings
SW Function
1 Door width
2 Not used
***
3
Sensitivity
***
4
Immunity
5 to 8 Not used

■ Detailed settings

Detailed settings can be done from a smart device browser.
Set the OC-907C T dipswitch 1 (priority setting) to ON (setting app priority) and the dipswitch 2 (Wi-Fi setting) to ON (using Wi-Fi communication).
1
From the Wi-Fi setting screen, find the Wi-Fi name (ELITEXXXXXXXX) and connect.
For iOS
Settings
Wi-Fi
Wi-Fi
NETWORKS
ELITE22222222
16
***
" mark below for the dipswitch settings for the OC-907C T and OA-607 T.
Dipswitches
Setting
Dipsw App
ON
OFF
Disable Enable
***
Disable Enable
ON
OFF
Setting
36" 42"/48"
ON
OFF
Normal Low
OFF ON
ON
OFF
For Android
Internet
Connected / 4G+
Wi-Fi
ELITE22222222
NOTE
When the OC-907C T dipswitch 1 is OFF, the setting in the
***
" " is enabled.
NOTE
When the OC-907C T dipswitch 1 is OFF, the setting in the
***
" " is enabled.
NOTE
XXXXXXXX is the serial number of the OC-907C T.
The initial password is 12345678. The password must be changed at
initial connection.