Onkyo TX-NR595 Instruction Manual page 76

• DSD audio signals cannot be output to ZONE 2 when selected with the "NET"
input selector.
• If ZONE 2 is on, power consumption during standby will increase.
• If ZONE 2 is turned on when the Pure Audio listening mode is selected in the
main room, the mode will automatically switch to the Direct listening mode.
(Asian models)
To set the function to off: While pressing and holding ZONE 2 SHIFT button,
press . Alternatively, press the OFF button on the main unit.
Contents Connections
≫
76
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫