Onkyo TX-NR595 Instruction Manual page 123

„ 3. Firmware Update
Change the settings for Firmware Update.
Setting Item Default Value
Update Notice Enable
Version -
Update via -
NET
Update via -
USB
• Wait for a while if "Firmware Update" cannot be selected. It can be selected when the
network function is activated.
„ 4. Initial Setup
Make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It can be selected when
the network function is activated.
„ 5. Lock
Lock the Setup menu so that the settings cannot be changed.
Setting Item Default Value
Setup Parameter Unlocked
Setting Details
Availability of a firmware update is notified via
network.
"Enable": Notify updates
"Disable": Do not notify updates
The current firmware version is displayed.
Press ENTER to select when updating the firmware
via network.
• This setting cannot be selected if you do not
have Internet access or there is no updatable
firmware.
Press ENTER to select when updating the firmware
via USB.
• This setting cannot be selected if a USB storage
device is not connected or there is no updatable
firmware in the USB storage device.
Setting Details
Lock the Setup menu so that the settings cannot be
changed.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
Contents Connections
≫
„ 6. Factory Reset
All the settings are restored to factory defaults.
Setting Item Default Value
Factory Reset -
123
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
All the settings are restored to factory defaults.
Select "Start", and press the ENTER button.
• If "Factory Reset" is performed, your settings are
restored to the default values. Be sure to note
down your setting contents beforehand.
≫