Onkyo TX-NR595 Instruction Manual page 119

„ 3. Bluetooth
Change the settings for the Bluetooth function.
Setting Item Default Value
Bluetooth On
Auto Input On
Change
Auto Reconnect On
Setting Details
Select whether or not to use the BLUETOOTH
function.
"On": Enables connection with a BLUETOOTH-
enabled device by using the BLUETOOTH
function. Select "On" also when making various
BLUETOOTH settings.
"Off": When not using the BLUETOOTH function
The input of the unit can be automatically switched
to "BLUETOOTH" when connection is made from
a BLUETOOTH-enabled device to the unit.
"On": The input is automatically set to
"BLUETOOTH" when a BLUETOOTH-enabled
device is connected.
"Off": The function is disabled.
• If the input is not switched automatically, set this
to "Off", and change the input manually.
This function automatically reconnects to the
BLUETOOTH-enabled device connected last
when you change the input to "BLUETOOTH".
"On": When this function is used
"Off": When this function is not used
• This may not work with some BLUETOOTH-
enabled devices.
Contents Connections
≫
Setting Item Default Value
Pairing -
Information
Device -
Status -
• Wait for a while if "Bluetooth" cannot be selected. It can be selected when the
BLUETOOTH function is activated.
„ 4. Power Management
Change the settings for the power-save function.
Setting Item Default Value
Sleep Timer Off
119
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
You can initialize the pairing information stored on
this unit.
Pressing ENTER when "Clear" is displayed
initializes the pairing information stored on this
unit.
• This function does not initialize the pairing
information on the BLUETOOTH-enabled
device. When pairing the unit again with the
device, be sure to clear the pairing information
on the BLUETOOTH-enabled device
beforehand. For information on how to clear
the pairing information, refer to the instruction
manual of the BLUETOOTH-enabled device.
Displays the name of the BLUETOOTH-enabled
device connected to the unit.
• The name is not displayed when "Status" is
"Ready" and "Pairing".
Displays the status of the BLUETOOTH-enabled
device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Successfully connected
Setting Details
You can allow the unit to enter standby
automatically when the specified time elapses.
Select a value from "30 minutes", "60 minutes" and
"90 minutes".
"Off": The unit does not automatically enter standby
mode.
≫