Onkyo TX-NR595 Instruction Manual page 103

4. Source 1. IntelliVolume
2. Name Edit
Audio Select
Video Select
5. Hardware 1. HDMI
2. Network
3. Bluetooth
4. Power Management
5. Works with SONOS
6. Multi Zone 1. Zone 2
2. Remote Play Zone
7. Miscellaneous 1. Tuner
2. Remote ID
3. Firmware Update
4. Initial Setup
5. Lock
6. Factory Reset
Contents
Adjust the volume level when there are differences in volume level among multiple devices
connected to this unit.
Set an easy name for each input.
Select the priority for input selection when multiple audio sources are connected to one input
selector.
When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from which
video is displayed on the TV.
Change the settings for the HDMI functions.
Change the settings for the Network functions.
Change the settings for the Bluetooth function.
Change the settings for the power-save function.
Change the settings to connect with the Sonos Connect.
Change the settings for Zone 2.
Change the settings for remote play.
Change the frequency step for the tuner.
Change the remote controller ID.
Change the settings for Firmware Update.
Make the initial setup from the setup menu.
Lock the Setup menu so that the settings cannot be changed.
All the settings are restored to factory defaults.
103
Connections
≫ ≫
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫
p114
p114
p115
p115
p116
p117
p119
p119
p121
p122
p122
p122
p122
p123
p123
p123
p123
≫