Dell P114F Service Manual page 73

2. Remove the base cover.
3. Remove the SIM card.
4. Remove the battery.
5. Remove the CAMM module
6. Remove the interposer board
7. Remove the primary solid-state
8. Remove the secondary solid-state
9. Remove the heat-sink for integrated graphics
10. Remove the inner frame.
About this task
The figure indicates the location of the display assembly and provides a visual representation of the removal procedure.
or long CAMM module or
module.
drive.
drive.
or heat-sink for discrete
memory module.
graphics.
Removing and installing components 73