Steps
1. Align and place the inner frame in the computer chassis.
2. Replace the four (M2x6) and the nine (M2x2) screws that secure the inner frame to the computer chassis.
3. Route the WLAN antennas and speaker cable using the routing guide on the inner frame.
4. Align and replace the (M2x2.5) screw to secure the WLAN bracket in place.
Next steps
1. Install the
long CAMM
NOTE:
For models shipped with long CAMM module.
2. Install the battery.
3. Install the
secondary solid-state
4. Install the
primary solid-state
5. Install the
base
cover.
6. Follow the procedure in
58
Removing and installing components
module.
drive.
drive.
after working inside your
computer.