Setting Dip Switches - Planar Dome M2/PCI Installation Manual

4 | Installing the Board and Display

Setting DIP Switches

DIP switches S1 and S2 each contain four switches. Here,
all switches are in the ON position for illustrative purposes.
The default setting is OFF for all switches on DIP switch S1.
This table lists the options for switches on DIP switch S2.
See pages 5 and 6 to set the switches in the correct position
for your platform.
ON/OFF positions for DIP switches on the M2 board
DIP Switch S2
1
2
3
4
a. Default setting.
ON
a
VGA enabled
EPROM enabled
Reserved
Reserved
OFF
VGA disabled
a
EPROM disabled
a
Reserved
a
Reserved