Connecting The Display - Planar Dome M2/PCI Installation Manual

Connecting the Display

After you install the M2 board in your computer, connect
your display(s) to the board using the cables provided.
Grayscale cables have three connectors on each branch; color
cables have five. (See the illustration on page 10.)
To connect a display to the board
1 Attach the DVI connector to the M2 board, securing
the connection with the thumbscrews on the connector.
(Refer to your display documentation for more
information on connector assignments.)
Cable connections for one or more analog displays
2 Attach each output cable to the appropriate BNC
terminal on your display.
MONITOR
1
2
Connecting the Display | 9