Motorola R-2550 Programming Reference Manual page 96

Description:
Command Syntax:
Parameters:
Notes:
Motorola Communications Analyzer
The FF command specifies bandwidth and post detection filter settings.
Description: High-pass Filter Selection
Optional: Yes
Type: <Decimal Numeric Program Data>
units: None
Resolution:
Range: 0: 5Hz
1: 3ooHz
2: 3kH.z
Reset: 0
Description: Low-pass Filter Selection
optional: Yes
Type:
units:
None
Resolution: N/A
0: 3OOHz
Range:
1: 3kHz
2: 20 kHz
2
The FF Command is not available on the R-2550.
Filter Selections