Motorola R-2550 Programming Reference Manual page 230

4 Trunking
The Trunking Option provides a set of commands and queries that are designed to specifically support the
functionality provided by the option.
The set of Trunking commands are only available when the analyzer is equipped with the
Trunking Option. Use of these commands without the option will cause the Invalid Mode Error
(Error 09).
The following table describes the Trunking commands and queries as implemented by the analyzer.
Trunking Commands are not available on the R-2550. Use of these commands will cause the
Invalid Mode Error (Error 09).
Motorola Communications Analyzer
Trunking Option Programming Reference
Note
Note:
14