Motorola R-2550 Programming Reference Manual page 6

Communications system analyzer
Table of Contents

Advertisement

About this Reference
This manual documents the control and measurement functions provided by the remote interface to the R-2550
and R-2600 Communications System Analyzer Series (R-2600, R-2660, R-2670, R2680). It is intended to provide
all the information necessary to develop application programs that remotely control both units. General usage of
the R-2600 analyzers is described in the
publication 68-80386B72. General usage of the R-2550
System Analyzer Operators Manual,
All of the analyzer models operate in a similar manner and many of the remote command are identical for all
products. Where there are differences in the remote commands for the analyzers, the text clearly identifies them.
Section
Introduction discusses configuration requirements, the layer model provided by the remote interface, and the three
modes of operation: Standard RS-232, Extended RS-232, and IEEE 488.2.
Section 2
Interface Functions discusses remote and local operations, RS-232 and IEEE 488.1 protocols, and print functions.
3
Section
Syntax
Overview discusses the Talker and Listener syntax provided by the analyzer. Differences between the
syntax of the Standard RS-232 mode and the Extended RS-232 and IEEE 488.2 modes are explained.
4
Section
Status
Reporting discusses the control and status data structures provided by the IEEE 488.2 model. The
capabilities of the model that are provided when operating under RS-232 control are described.
Section 5
Programming Conventions discusses optional command parameters and optional response parameters.
Section 6
Command Set Organization presents an overall description of the command set; describing command groupings
and manual entries for the commands. A quick reference to the command set is also provided.
7
Sections
and on
The individual command and query pages give detailed descriptions of each command, including syntax,
parameters, responses, and special notes.
Motorola Communications Analyzer
Programming Reference
R-2600 Communications System Analyzer Series Operator's Manual,
analyzers is described in the R-2550 Communications
publication 68-80309E.54.
iv

Advertisement

Table of Contents
loading

This manual is also suitable for:

R-2600

Table of Contents