Table of Contents
Advertisement
1 Introduction
This manual documents the unique Motorola Analog Trunking control and measurement commands used
remote
interface to the R-2670 Communications System Analyzer. Along with publication 68-80309E55,
Programming Reference, Motorola R-2550 and R-2600 Communications System Analyzer Series (found behind
the General Operation tab in the 3-ring binder), this manual is intended to provide the information necessary to
develop application programs that remotely control the analyzer for use in testing Motorola Analog Trunking
equipment.
This manual includes a Command Set Quick Reference in Section 2. In Sections 3 and 4, individual command and
query pages give detailed descriptions of each command (including syntax, parameters, responses, and special
notes), for the option covered in this manual.
Refer to publication 68-80309E55, Programming Reference Motorola R-2550 and R-2600 Communications
System Analyzer Series for the following.
Section
Introduction discusses
three modes of operation: Standard RS-232, Extended RS-232, and IEEE 488.2.
Section 2
Interface Functions discusses remote and local operations, RS-232 and IEEE 488.1 protocols, and print
functions.
Section 3
Syntax Overview discusses the Talker and Listener syntax provided by the R-2600. Differences between the
syntax of the Standard RS-232 mode and the Extended RS-232 and IEEE 488.2 modes are explained.
Section 4
Status Reporting discusses the control and status data structures provided by the IEEE 488.2 model.
capabilities of me model that are provided when operating under RS-232 control are described.
Section 5
Programming Conventions discusses
Section 6
Command Set Organization presents an overall description of the command set; describing command groupings
and manual entries for the commands. A quick reference to the command set is also provided.
The individual command and query pages give detailed descriptions of each command, including syntax,
parameters, responses, and special notes.
configuration
requirements, the layer model provided by the remote interface, and the
optional command parameters and optional response parameters.
Motorola Communications Analyzer
1
Trunking Option Programming Reference
by the
The
Advertisement
Table of Contents
