Motorola R-2550 Programming Reference Manual page 132

NQ?
Description:
Query Syntax:
Standard RS-232
Response Syntax:
IEEE 488.2
Response Syntax:
Parameters:
Motorola Communications Analyzer
Programming Reference
The NQ query returns the current status of the Non-Sequence Decode. This command is
only valid if the current measurement mode is a non-sequence decode (if one of the
following commands has been used: ND, NP, or NT).
s 1 <CR-LF>
Description:
Current Decode Status
Type:
Format:
STATUS 00:
STATUS 02
STATUS 04:
122
Non-Sequence Decode Status Query
Decode active
No si,ti
Decode reset