Container Curtain; Installing The Curtain - Carrier EverFRESH Operation, Service And Parts Manual

6.3

Container Curtain

Potential hazardous atmosphere and low oxygen levels may exist inside the container. Venti-
late before entering. Stay away from doors and access panels while venting. Refer to
3.6.
Required Tools:
• CA Curtain Wedge Tool (pack of 5: 07-00573-00PK5)
• Curtain Clips (pack of 50: 34-50093-01)
• Sharp Hand Cutting Tool (purchase local)
* Contact your local CAP representative for quantities
Kit 76-50036-02:
• Curtain (58-04153-02)
• Ribbon (58-66775-00)
• Warning label (69NT--35--1618)
• Instructions (62-11921-00 Rev C)
6.3.1

Installing the Curtain

1. Open the rear doors of the container box and inspect the curtain track for dirt or damage (edges on track).
Clean dirt and remove any sharp edges found on the track.
2. Fully unfold the door curtain. Align the arrow with the "CENTER" at the midpoint of the door opening (Figure
2a). Ensure "CENTER" can be read as this is the outside of the curtain.
T-374
WARNING
!
6–4
Section