Carrier EverFRESH Operation, Service And Parts Manual page 45

5. Remove the cylinder from the air compressor by removing the 2 - 3/16" hex bolts and pulling off the piston.
Use caution not to damage the fan. Discard all components except for the crossbar.
6. Remove the piston guide and rings from the piston and discard.
7. Remove the second head and cylinder.
8. Remove the fan by removing the clamp that secures the fan to the shaft.
9. Remove the fan by using a small puller. A new fan is provided with the rebuild kit so discard after removal.
5–13 T-374