Interfaces And Operator Controls For Devices With 100-240 V Ac Power Supply - Siemens SIMATIC IPC PX-39A Operating Instructions Manual

1.4.2 Interfaces and operator controls for devices with 100-240 V AC power
supply
Device without expansion slot
① Protective conductor
② On/off switch
③ 100-240 V AC
X80
④ 4 × USB
X60/X61/X62/X63
⑤ 2 x DPP
X70/X71
⑥ 4 × Ethernet
X1 P1/X2 P1/X3
P1/X4 P1
⑦ COM1 X30
⑧ 2 x slot for SSD drive
SSD1 X50/SSD2 X51
⑨ Opening for expansion in-
terface X101 or
COM2 X31 (optional)
⑩ Opening for expansion in-
terface X100
Device with expansion slot
Other device variants (Page 49):
• with slot for one PCIe expansion card
You can find more information about expansion cards under "Expansion cards (Page 65)".
SIMATIC IPC PX-39A
Operating Instructions, 08/2022, A5E51699601-AA
Connection for functional grounding
You switch on the device with the on/off switch. The on/off switch does not isolate the de-
vice from the power supply.
• Position "ON", when the "_" symbol is pressed.
• Position "OFF" is the delivery state.
Power supply connection
USB 3.2 Gen 2 type A, high current, backward compatible
Connection for monitors with DisplayPort interface
Connections for Ethernet RJ45 for 10/100/1000 Mbps
• Ethernet X1 P1 is iAMT-capable
• Ethernet X2 P1, Ethernet X3 P1 and Ethernet X4 P1
Serial interface 1 (V.24), 9-pin SUB-D socket
SSD drives in NVMe format, installed in SIMATIC IPC Slider
Interfaces of external expansion modules (M.2 format)
Serial interface 2 (V.24), 9-pin SUB-D socket (optional)
Interfaces of external expansion modules (M.2 format)
Product description
1.4 External design of the device
15